HETAS Guide Survey
It’s been a few months since we published the HETAS Guide 2017. HETAS constantly strives to provide installers, retailers and manufacturers with useful information in the Guide and the online search function. We would really like your thoughts on the current Guide and how you use it so we can continue to provide you with the information on appliances to assist you in completing a safe and compliant installation.
The survey will take less than five minutes to complete and your feedback is very much appreciated.
Click here to take the survey.
You can view the current HETAS Guide at www.hetas.co.uk/professionals/hetas-guide or click here to view the Appliance Search.
Heat Hero Gets HETAS Listing
Heat Hero is the latest product to be listed in the HETAS Guide under Link-Up Systems for Heating & Hot Water.
The product is a unique system based on manifold injectors in two installed units that enable circulation around a solid fuel fired heating system to be maximised as well as gravity circulation around the hot water storage cylinder when the heating/radiator system is not energised. It contains no moving parts or any electrical components. Where required, it enables a secondary heat source, such as a gas or oil fired boiler, to be linked into the system with the solid fuel boiler.
Heat Hero on Vimeo
There are no specific technical standards for assessing the design, production or performance of this type of equipment although there do exist standards for the individual components from which the devices are built up. For example, plate heat exchangers, pipes and fittings and electrical components. It is therefore not a requirement that the equipment is CE Marked.
The listings given in the HETAS Guide are based on the manufacturer demonstrating satisfactorily that their product is safe and fit for the purpose of serving a boiler red by biomass or solid mineral fuel. This will normally be an assessment by an independent authorised competent organisation such as a Notified Body. In the absence of any regulatory standards for the design, production or performance of the equipment listed it is not possible for HETAS to approve it. The listing is therefore simply a recognition that the manufacturer has taken all necessary steps to ensure their product is safe and fit for its purpose when installed in accordance with their instructions.
Find out more about the Heat Hero listing and other ancillary products such as Zonealone’s Heat Genie, Advanced Appliances thermal storage cylinder and AMAC chimney inspection cameras in the HETAS Guide by visiting www.hetas.co.uk/find-appliance and clicking on Ancillary Products.
Interested in getting a product approved or listed with HETAS? Get in touch with the Product Approval team on 01684 278170 or email firstname.lastname@example.org.
HETAS Guide 2017 is coming
The 2017 edition of the HETAS Guide will be launched at Ecobuild at the start of March. Ecobuild is the UK’s largest and number one event for specifiers across the built environment and takes place at ExCeL, London from 7th March.
Speaking about the new Guide, Bruce Allen says “We are committed to achieving industry best practice for our registrants, and most importantly, our customers. We receive lots of positive feedback about the benefits of using the Guide and will continue to improve the Guide and the online search facility.”
“The new format of the Guide is more accessible allowing all users information in a clear to understand way.”
In addition to the new Guide, the HETAS interactive search facility has been enhanced. This search also includes appliances that have been verified on the new Ecodesign Ready Scheme. Take a look at the upgraded search facility at www.hetas.co.uk/find-appliance.
Copies of the HETAS Guide 2017 will be sent out to our registrants over the coming weeks, with additional copies available via the HETAS Shop from March.
Find out more about HETAS, MCS and SIA product schemes at www.hetas.co.uk/professionals/manufacturers.
With only a few weeks remaining of 2013 we are already busy here at HETAS preparing for the 2014 edition of The Official Guide to HETAS Approved Products & Services. We are continually working to improve the Guide both for the manufacturers who list their products and also for those who use the Guide on a daily basis. We have some interesting developments lined up for 2014 to build on the success of this year’s new format. For 2014 we are planning an initial print run of 10,000 copies which will be circulated throughout the industry and complemented by the interactive online HETAS Guide which is updated monthly at www.hetas.co.uk/professionals/hetas-guide.
An advertiser’s pack outlining the advertising opportunities available for the 2014 Guide is now available and you will be pleased to hear that there will be far greater scope for advertising this year, with adverts available at the start and end of each section of the HETAS Guide as well as half page vertical advertising.
Find out more…
To request an advertising pack please contact either Alun or Phil in the marketing team using the email addresses below along with your business name and address and we’ll get a pack sent out to you.
Alun Williams – email@example.com
Philip Davis – firstname.lastname@example.org
The advertising deadline is Friday 13th December 2013 and we anticipate that the available space will be booked up quickly so please contact us at your earliest opportunity. If you have any questions please do not hesitate to get in touch with the team.
The Official Guide to HETAS Approved Products & Services will be available from March 2014 and will be officially launched at Ecobuild 2014. Find out more about Ecobuild on their website by visiting www.ecobuild.co.uk