Island Pellet Stoves Ltd.

Lundy 5kW

HETAS ID: E42677
App. Type: Roomheaters
Fuel Type: Wood Pellet
Certificate Ref: AA-2023-15/02
Std. Tested to: EN 14785:2006
Hearth Req: Single Sheet
Manufacturer Address: 9 Drake Walk, Brigantine Place, Cardiff, CF10 4AN
Manufacturer Email: [email protected]
Telephone Number: 0330 111 4747


HETAS has audited and verified that all applicable clauses in the test report have been passed in respect of the materials, design, and construction in accordance with the relevant BS EN type test standard for the appropriate technology, performance criteria of which is below;

Nominal Output - Wood Pellet - Full Load 4.9KW
Net Efficiency - Wood Pellet - Full Load 82%
Gross Efficiency - Wood Pellet - Full Load 75.4%
Net Efficiency - Wood Pellet - Part Load 79.6%
Gross Efficiency - Wood Pellet - Part Load 73.2%


In support of reducing the impacts of particulate emissions on the UK's overall air quality targets, HETAS “Cleaner Choice” appliances have been independently verified as exceeding the current requirements for UK smoke control areas for particulate matter, including PM2.5's by 50% of that required by DEFRA;


Improvement on Clean Air Act Particulate Limit – Full Load


Improvement on Clean Air Act Particulate Limit – Part Load


The product certified has been assessed for its suitability for installation in domestic properties against the requirements of the Building Regulations and appropriate standards. The performance of the appliance has been verified as meeting the following technical performance attributes;

Combustible Clearances - Rear 100 mm
Combustible Clearances - Side 100 mm
Hearth Temperature > 73.9
Appliance Spigot SIze 125 mm
Minimum Flue Diameter 125 mm
Recomended Flue Draught 12Pa
External Air Supply Compatible *Yes
Tool Required for Refue/De-Ash Yes
Flue Draught test Point Yes

*HETAS product approval is not valid for appliances fitted with an external air supply ducted directly to the appliance. The installer should reference HETAS technical note TN_0020 General Guidance for the Installation, Risk Assessment & Commissioning of Solid Fuel Appliances with a Dedicated External Air Supply for more information.

Technical Data

The purpose of this HETAS Stove Approval Scheme is to help consumers, retailers, installers and others to identify stoves with lower particulate (PM) emissions. There are concerns that small particle emissions known as PM2.5 to PM10 can be harmful. For that reason, we are operating a scheme which only accepts appliances that are tested to emit lower emissions compared to the current legal requirements. We have chosen to set the bar for entry at 50% less emissions than required for exemption for use in smoke control areas in the UK. We also note that Ecodesign legislation has differing, but important limits for other emission and any appliances listed here must meet those requirements as well as exceeding the particulate emission values for exemption by at least 50%.

Additionally, the product certified has been assessed for its compliance against the legal requirements for emissions and efficiency stipulated within the Ecodesign regulations. The performance of the appliance has been verified as meeting the following environmental attributes;

PM - Wood Pellet 1.9 mg/m3
OGC Emissions - Wood Pellet 13 mg/m3
CO Emissions - Wood Pellet 105 mg/m3
NOx Emissions - Wood Pellet 112 mg/m3
Seasonal Efficiency - Wood Pellet 72%
Energy Label Ratings A+

Appliance Dimensions

Height 650mm
Width 640mm
Depth 580mm

Search our registered businesses

Enter your full postcode in the search input to find a service provider in your area and your results will show here
No results found. Would you like to expand the search radius?

Expand radius

Related products


HETAS, Severn House, Unit 5 Newtown Trading Estate, Green Lane, Tewkesbury, GL20 8HD